KitchenAid Cooktop F4 Error Code

Everything about F4 comes down to placement. The code appears on a KitchenAid cooktop when cookware sits too close to the touch control panel. One article covers electric cooktops and the combined electric and induction type alike.

Clearing it

1. Make sure the pan is centered over the cooking zone and nothing hot lies on the touch panel.
2. Lift the cookware off the cooktop altogether.
3. Allow five minutes for the panel to clear.

Waiting time

How long until the panel recovers? Five minutes, says the article.

Two habits from the instructions

Keep cookware centered on its zone, and keep hot things off the control panel. Heat is set on that panel, so hot items resting on it match exactly what F4 describes.

When the panel has not recovered

If five minutes pass and the panel stays blocked, the article moves to the power reset: breaker off for sixty seconds, back on, a minute of observation, and a check that everything runs. Since the cause is placement, a code that survives all of this is the sign to arrange service.

Other messages from the panel

• C82 concerns cookware that is the wrong size, empty or dry.
• F0 / F00 means something is leaning on the panel.

Cooktop repair in Los Angeles

If F4 appears with the cookware nowhere near the panel, call (310) 363-8964. Say how long you waited and where the pan had been standing; the cooktop repair page is also available.

Source: KitchenAid Product Help, Electric Cooktop: Error Code or Indicator Light