Reviewed by Liam Porter · Last reviewed August 11, 2026
Written by
Liam Porter Appliance Care EditorPublished September 2, 2026Updated October 17, 2026
Content status:
Verified
Error codeF7E1
ApplianceDishwasher
Quick answer
F7E1 is the no-heat entry. The control turned off the heater after noticing a heating problem.
Model compatibility: KitchenAid reuses codes across series and model years, so F7E1 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
Plain language
What this code means
No heat: the control switched the heater off after detecting a water heating problem; the heater, its circuit or the drive circuit may be open.
What the label says
Both KitchenAid service documents file F7E1 as “heating, no heat.” The control saw that water was not warming properly and answered by disabling the heater.
Three listed faults
Open heater
Open heater circuit
Fault in the drive circuit that powers the heater
An “open” is a break where current should pass. Which of the three is typical is not stated.
Do not confuse it with F7E2
F7E1 and F7E2 sound alike yet are opposites. F7E1 is no heat. In the same tech sheet, F7E2 is “heater stuck on,” a drive circuit fault on the control, and on the owner-help pages it carries another label, “Wash Motor Error.” A machine showing F7E1 is neither of those.
Owner guidance
The source has nothing aimed at owners. As a general precaution, stop using the machine and wait for service, and keep out of the lower panel and wiring while it is plugged in. Mention it if dishes leave the cycle cold or wet.
Left unexplained
Neither document says how the control decided that heating had failed, how long it waited, or whether temperature played a part.
Related codes
F7E2: heater stuck on, plus the wash motor label from owner help
F3E1: thermistor circuit, which is a sensor rather than the heater
Dishwasher no-heat repair in Los Angeles
When F7E1 will not go away, KitchenAid dishwasher service in Los Angeles is a call to (310) 363-8964. Have the model number and any notes about cold or wet dishes. Read about visits on the dishwasher repair page.
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Seeing this code on your KitchenAid appliance?
Book a specialist visit for a clear estimate and approval before any repair.
