KitchenAid Wall Oven 3D31, 3D32, 3D41 Meat Probe Code

There is usually a plain explanation here. KitchenAid’s wall oven help says 3D31, 3D32 and 3D41 appear when the meat probe is not securely inserted in the meat probe receptacle.

Step one: the probe

KitchenAid’s first instruction is to verify that the probe sits firmly in its receptacle. The receptacle’s location may vary, so look in your owner’s manual to find it on your oven.

Step two: power reset

1. Turn the oven’s breaker off and keep it off for one minute.
2. Turn the breaker on.
3. Look at the display for about a minute for any return of 3D31, 3D32 or 3D41.
4. Confirm that the oven works.

Reading the three codes

• 3D31: probe not securely inserted
• 3D32: probe not securely inserted
• 3D41: probe not securely inserted

The text never separates them, so both steps above apply to each. A seating problem concerns the probe connection; it is not presented as a heating or temperature fault. Of everything listed, only the reseating touches the probe, and the rest is the breaker reset.

Asking for help

Should a firmly seated probe plus a reset leave the display unchanged, KitchenAid says to contact or schedule service. The 3D31 article adds that a qualified technician may be needed. No cause beyond seating is named.

Other probe codes

• F3E4: a dislocated meat probe or, on some models, the roll-out rack power attachment
• F4E7: the microwave meat probe or its receptacle, on ovens with a microwave

Wall oven repair in Los Angeles

Still seeing the code after the probe is reseated? Phone (310) 363-8964. Have the code ready, and if you own a spare probe, let us know whether it behaved the same way.

Source: KitchenAid Product Help, Wall Oven: Error Code or Message