For the KitchenAid oven record covered here, F3E0 is associated with oven temperature sensor (rtd) circuit open or out of range. This wording should be read narrowly: it describes the system or condition the control is reporting, not a guaranteed failed part.
Reviewed by Liam Porter · Last reviewed August 11, 2026
Written by
Liam Porter Appliance Care EditorPublished September 2, 2026
Content status:
Verified
Error codeF3E0
ApplianceOven
Affected model seriesKitchenAid ovens and ranges with Whirlpool-family F#E# electronic oven controls (confirm yours)
Quick answer
For the KitchenAid oven record covered here, F3E0 is associated with oven temperature sensor (rtd) circuit open or out of range. This wording should be read narrowly: it describes the system or condition the control i…
Model compatibility: KitchenAid reuses codes across series and model years, so F3E0 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
Plain language
What this code means
F3E0 means the oven temperature sensor (RTD) is reading open, or its resistance is higher than the control expects, so the control cannot confirm the cavity temperature. This aligns with the RTD ERROR text message used on some KitchenAid controls. KitchenAid ovens and ranges use Whirlpool-family electronic oven controls (EOC) across several generations; the exact fault behind a given F#E# pair can vary slightly by model and control generation. Record your model and serial numbers and confirm against your appliance documentation.
Signs
Symptoms you may notice
Preheat, temperature regulation, or baking results may be abnormal.
The oven may stop heating or refuse a cooking mode while the sensor reading is invalid.
The code/message can return as soon as the control checks the RTD circuit.
Why it happens
Possible causes
An RTD sensor circuit that is open, shorted, or outside expected range.
Harness or connector damage between the RTD and control.
A control input problem after the sensor circuit has been verified.
Before you call
Safe checks you can make
These are simple, non-hazardous checks only. If anything is unclear, stop and contact a technician.
Allow the oven to cool fully
One breaker power cycle for two minutes
Contact authorized service for sensor resistance testing — do not probe live wiring
Important safety warning. Do not open internal panels, access high-voltage wiring, or bypass any safety device. If you ever smell gas, stop immediately, do not operate any switches, leave the area and contact your gas provider and a qualified technician. If you see smoke, sparks, a burning smell, or water near electrical parts, switch the appliance off at the outlet if it is safe to do so and call a professional.
Please avoid
What not to attempt
Do not open internal panels or access high-voltage components
Do not bypass door locks, safety switches or interlocks
Do not adjust, disconnect or repair any gas connection or valve
Get help
When to call a technician
If the safe checks do not resolve the condition, schedule an independent KitchenAid appliance diagnosis. Provide the full model number and a photo of the F3E0 display so the technician can start with the correct model-specific code map.
Seeing this code on your KitchenAid appliance?
Book a specialist visit for a clear estimate and approval before any repair. Independent service — not an official KitchenAid service center.
For the KitchenAid oven record covered here, F5E1 is associated with door-latch switch state is inconsistent with the commanded lock state. This wording should be read narrowly: it describes the system or condition th…
For the record covered by this page, F3E0 relates to oven temperature sensor (rtd) circuit open or out of range. Confirm the exact definition against the full model number before ordering parts or authorizing an internal repair.
You can correct an obvious external condition and use the normal owner-approved restart or acknowledgement procedure. If the same code returns, clearing the display again does not repair the cause.
Only if the condition is clearly a normal status/maintenance indication and the appliance is operating normally. Stop using it for smoke, burning odor, arcing, repeated breaker trips, uncontrolled heating, gas odor, active leakage near electrical parts, or a significant loss of refrigeration.
No. The code identifies a condition or diagnostic path. Model-specific testing should confirm the failed component before parts are ordered.
