For the KitchenAid oven record covered here, PROBE ERROR is associated with meat-probe circuit is open or shorted. This wording should be read narrowly: it describes the system or condition the control is reporting, not a guaranteed failed part.
Reviewed by Liam Porter · Last reviewed August 11, 2026
Written by
Liam Porter Appliance Care EditorPublished September 2, 2026
Content status:
Verified
Error codePROBE ERROR
ApplianceOven
Quick answer
For the KitchenAid oven record covered here, PROBE ERROR is associated with meat-probe circuit is open or shorted. This wording should be read narrowly: it describes the system or condition the control is reporting, n…
Model compatibility: KitchenAid reuses codes across series and model years, so PROBE ERROR may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
Plain language
What this code means
Per the KitchenAid use & care manual, PROBE ERROR indicates the meat probe is open or shorted. If the probe is not plugged in, plug it into the oven. Press OFF to clear the message. If the probe is connected and the error remains, contact authorized service.
Signs
Symptoms you may notice
Probe temperature may not register correctly.
Probe-assisted cooking can stop or be unavailable.
The message may return as soon as the probe circuit is checked.
Why it happens
Possible causes
Probe not fully connected on models with a removable probe.
An open or shorted probe/sensor circuit.
Connector, wiring, or control-input trouble.
Before you call
Safe checks you can make
These are simple, non-hazardous checks only. If anything is unclear, stop and contact a technician.
Ensure the meat probe is fully plugged into the oven jack
Press OFF to exit and clear the error message
If the probe is connected and PROBE ERROR remains, call authorized service
Important safety warning. Do not open internal panels, access high-voltage wiring, or bypass any safety device. If you ever smell gas, stop immediately, do not operate any switches, leave the area and contact your gas provider and a qualified technician. If you see smoke, sparks, a burning smell, or water near electrical parts, switch the appliance off at the outlet if it is safe to do so and call a professional.
Please avoid
What not to attempt
Do not open internal panels or access high-voltage components
Do not bypass door locks, safety switches or interlocks
Do not adjust, disconnect or repair any gas connection or valve
Get help
When to call a technician
If the safe checks do not resolve the condition, schedule an independent KitchenAid appliance diagnosis. Provide the full model number and a photo of the PROBE ERROR display so the technician can start with the correct model-specific code map.
Seeing this code on your KitchenAid appliance?
Book a specialist visit for a clear estimate and approval before any repair. Independent service — not an official KitchenAid service center.
For the KitchenAid oven record covered here, LATCH ERROR is associated with control could not lock or unlock the oven door latch. This wording should be read narrowly: it describes the system or condition the control…
For the KitchenAid oven record covered here, KEYBOARD ERROR is associated with keyboard / user-interface is not communicating with the control. This wording should be read narrowly: it describes the system or conditio…
For the exact record already present on the KitchenAid site, use the current verified meaning stored with that record. Do not replace it with a meaning taken from another appliance family just because the display look…
For the record covered by this page, PROBE ERROR relates to meat-probe circuit is open or shorted. Confirm the exact definition against the full model number before ordering parts or authorizing an internal repair.
You can correct an obvious external condition and use the normal owner-approved restart or acknowledgement procedure. If the same code returns, clearing the display again does not repair the cause.
Only if the condition is clearly a normal status/maintenance indication and the appliance is operating normally. Stop using it for smoke, burning odor, arcing, repeated breaker trips, uncontrolled heating, gas odor, active leakage near electrical parts, or a significant loss of refrigeration.
No. The code identifies a condition or diagnostic path. Model-specific testing should confirm the failed component before parts are ordered.
