For the KitchenAid dishwasher record covered here, F2E5 is associated with user-interface problem. This wording should be read narrowly: it describes the system or condition the control is reporting, not a guaranteed failed part.
Reviewed by Liam Porter · Last reviewed August 11, 2026
Written by
Liam Porter Appliance Care EditorPublished September 2, 2026
Content status:
Verified
Error codeF2E5
ApplianceDishwasher
Affected model seriesSelect KitchenAid electronic-control appliances (verify the code map for yours)
Quick answer
For the KitchenAid dishwasher record covered here, F2E5 is associated with user-interface problem. This wording should be read narrowly: it describes the system or condition the control is reporting, not a guaranteed…
Model compatibility: KitchenAid reuses codes across series and model years, so F2E5 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
Plain language
What this code means
Interface electronics fault. Avoid pressing wet/sticky keys; reset once. Artisan Repair uses the code as a starting clue; final diagnosis still follows your appliance’s documentation.
Signs
Symptoms you may notice
Buttons may not respond normally or may behave inconsistently.
The display can freeze, reset, or return the code after power-up.
Normal operation may be unavailable while the interface/control link is missing.
Why it happens
Possible causes
A user-interface/keypad problem.
A loose or damaged communication path between interface and main control.
A control-side communication or power problem.
Before you call
Safe checks you can make
These are simple, non-hazardous checks only. If anything is unclear, stop and contact a technician.
Confirm stable power at the outlet
Perform a manufacturer-approved restart once
Record the full model number for the technician
Write down when F2E5 appeared and which cycle or mode was running
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Please avoid
What not to attempt
Do not open internal panels or access high-voltage components
Do not bypass door locks, safety switches or interlocks
Get help
When to call a technician
If the safe checks do not resolve the condition, schedule an independent KitchenAid appliance diagnosis. Provide the full model number and a photo of the F2E5 display so the technician can start with the correct model-specific code map.
Seeing this code on your KitchenAid appliance?
Book a specialist visit for a clear estimate and approval before any repair. Independent service — not an official KitchenAid service center.
For the KitchenAid dishwasher record covered here, F2E6 is associated with user-interface problem. This wording should be read narrowly: it describes the system or condition the control is reporting, not a guaranteed…
For the KitchenAid dishwasher record covered here, F3E0 is associated with thermistor / temperature-monitoring problem. This wording should be read narrowly: it describes the system or condition the control is reporti…
For the KitchenAid dishwasher record covered here, F3E2 is associated with temperature-sensor condition (model-dependent). This wording should be read narrowly: it describes the system or condition the control is repo…
For the record covered by this page, F2E5 relates to user-interface problem. Confirm the exact definition against the full model number before ordering parts or authorizing an internal repair.
You can correct an obvious external condition and use the normal owner-approved restart or acknowledgement procedure. If the same code returns, clearing the display again does not repair the cause.
Only if the condition is clearly a normal status/maintenance indication and the appliance is operating normally. Stop using it for smoke, burning odor, arcing, repeated breaker trips, uncontrolled heating, gas odor, active leakage near electrical parts, or a significant loss of refrigeration.
No. The code identifies a condition or diagnostic path. Model-specific testing should confirm the failed component before parts are ordered.
