Reviewed by Liam Porter · Last reviewed August 11, 2026
Written by
Liam Porter Appliance Care EditorPublished September 2, 2026Updated October 17, 2026
Content status:
Verified
Error codeF6E1
ApplianceDishwasher
Quick answer
F6E1 has two KitchenAid readings: a user interface and main control error with a power-cycle reset, and low or no inlet water.
Model compatibility: KitchenAid reuses codes across series and model years, so F6E1 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
Plain language
What this code means
Owner help lists a User Interface Error, Main Control; the service tables list low or no inlet water.
Two descriptions of one code
The documents do not agree on F6E1. Owner-help pages give the potential cause as a User Interface Error, Main Control, whereas the technician service tables place the same code in the low or no inlet water category.
The owner-help reading and its reset
That page tells you to cycle power and call for service if the code stays. KitchenAid likens it to restarting a computer: the control sits without power for half a minute.
Plug-in model: pull the plug, wait half a minute, reinsert it.
Hard-wired model: switch its breaker off in the house panel, wait half a minute, then restore it.
The service-table reading
In the technician documents F6E1 is a mechanical inlet-water issue with four items on the list:
No water supply
Wash water that is captured
A problem with the drain loop
Trouble with the fill valve or the fill line
None of these comes with owner steps. People working on an opened machine are the audience for the tables.
Which one is yours?
The documents leave open which models match which description, so the code cannot settle it alone. Do the power cycle and see whether the code comes back. If it does, service is the next step whichever reading applies. When you call, describe what the dishwasher was doing as F6E1 appeared, in particular whether it was filling.
Codes to look at next
F6E2 covers the fill valve on its electrical side.
F1E2 is a further control listing that has a reset of its own (communication error).
H2O reports that no water is detected and includes supply checks.
Dishwasher control and inlet repair in Los Angeles
Once the 30-second reset has failed to hold, ring (310) 363-8964 for KitchenAid dishwasher repair in Los Angeles. Tell us the power cycle was tried, and have the model number ready.
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Seeing this code on your KitchenAid appliance?
Book a specialist visit for a clear estimate and approval before any repair.
