For the KitchenAid refrigerator record covered here, CF is associated with condenser fan problem. This wording should be read narrowly: it describes the system or condition the control is reporting, not a guaranteed failed part.
Reviewed by Liam Porter · Last reviewed August 11, 2026
Written by
Liam Porter Appliance Care EditorPublished September 2, 2026
Content status:
Verified
Error codeCF
ApplianceRefrigerator
Affected model seriesKitchenAid built-in, Professional, 5 Series and 7 Series refrigeration (confirm your model manual)
Quick answer
For the KitchenAid refrigerator record covered here, CF is associated with condenser fan problem. This wording should be read narrowly: it describes the system or condition the control is reporting, not a guaranteed f…
Model compatibility: KitchenAid reuses codes across series and model years, so CF may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
Plain language
What this code means
Condenser fan fault (CF) — the condenser fan is not running correctly. Cooling performance will degrade until repaired.
Signs
Symptoms you may notice
Cooling performance may weaken or temperatures may begin to drift.
The fan may be silent when airflow is expected, or operation may become intermittent.
A temperature alarm can appear later if airflow remains inadequate.
Why it happens
Possible causes
A blocked airflow path around the fan.
A fan motor that is not starting or drawing expected current.
Wiring, connector, or control issues in the fan circuit.
Before you call
Safe checks you can make
These are simple, non-hazardous checks only. If anything is unclear, stop and contact a technician.
Clear debris from rear grille area
Vacuum condenser area if manual allows
Disconnect power at the breaker for five minutes, then restore to clear stored alarms. Press alarm/controls per your manual if applicable.
Important safety warning. Never open the sealed refrigerant system. Condenser fan and compressor work involves high voltage.
Please avoid
What not to attempt
Do not open internal panels or access high-voltage components
Do not bypass door locks, safety switches or interlocks
Get help
When to call a technician
If the safe checks do not resolve the condition, schedule an independent KitchenAid appliance diagnosis. Provide the full model number and a photo of the CF display so the technician can start with the correct model-specific code map.
Seeing this code on your KitchenAid appliance?
Book a specialist visit for a clear estimate and approval before any repair. Independent service — not an official KitchenAid service center.
For the KitchenAid refrigerator record covered here, DF is associated with defrost cycle did not complete normally. This wording should be read narrowly: it describes the system or condition the control is reporting,…
For the KitchenAid refrigerator record covered here, H20 is associated with water-inlet / fill-system problem. This wording should be read narrowly: it describes the system or condition the control is reporting, not a…
For the record covered by this page, CF relates to condenser fan problem. Confirm the exact definition against the full model number before ordering parts or authorizing an internal repair.
You can correct an obvious external condition and use the normal owner-approved restart or acknowledgement procedure. If the same code returns, clearing the display again does not repair the cause.
Only if the condition is clearly a normal status/maintenance indication and the appliance is operating normally. Stop using it for smoke, burning odor, arcing, repeated breaker trips, uncontrolled heating, gas odor, active leakage near electrical parts, or a significant loss of refrigeration.
No. The code identifies a condition or diagnostic path. Model-specific testing should confirm the failed component before parts are ordered.
References
Sources & references
KitchenAid built-in / Professional refrigeration — display & alarm codes (confirm model manual)
Ready to get your KitchenAid appliance working again?
Book a repair online or call us — clear estimates and approval before any repair work begins.
