For the KitchenAid refrigerator record covered here, do is associated with door or drawer has remained open beyond the alarm delay. This wording should be read narrowly: it describes the system or condition the control is reporting, not a guaranteed failed part.
Reviewed by Liam Porter · Last reviewed August 11, 2026
Written by
Liam Porter Appliance Care EditorPublished September 2, 2026
Content status:
Verified
Error codedo
ApplianceRefrigerator
Affected model seriesKitchenAid built-in, Professional, 5 Series and 7 Series refrigeration (confirm your model manual)
Quick answer
For the KitchenAid refrigerator record covered here, do is associated with door or drawer has remained open beyond the alarm delay. This wording should be read narrowly: it describes the system or condition the contro…
Model compatibility: KitchenAid reuses codes across series and model years, so do may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
Plain language
What this code means
Door open (do / DO) — a door or drawer has been open longer than the alarm delay (often 3–5 minutes).
Signs
Symptoms you may notice
An alarm may sound or the display may show the door-related code.
Cooling can be affected if the door truly remains open.
If the door is closed, the code may still remain when the switch state is not being detected correctly.
Why it happens
Possible causes
A door or drawer that is not fully closed.
A misaligned or obstructed switch/latch area.
A door-switch, wiring, or control-input problem if closure is correct.
Before you call
Safe checks you can make
These are simple, non-hazardous checks only. If anything is unclear, stop and contact a technician.
Close the open door or drawer
Press ALARM button to mute if manual allows
Check gaskets if alarm repeats with door closed
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Please avoid
What not to attempt
Do not open internal panels or access high-voltage components
Do not bypass door locks, safety switches or interlocks
Get help
When to call a technician
If the safe checks do not resolve the condition, schedule an independent KitchenAid appliance diagnosis. Provide the full model number and a photo of the do display so the technician can start with the correct model-specific code map.
Seeing this code on your KitchenAid appliance?
Book a specialist visit for a clear estimate and approval before any repair. Independent service — not an official KitchenAid service center.
For the KitchenAid refrigerator record covered here, E1 is associated with compressor current/amperage problem. This wording should be read narrowly: it describes the system or condition the control is reporting, not…
For the KitchenAid refrigerator record covered here, E2 is associated with condenser fan motor amperage out of range. This wording should be read narrowly: it describes the system or condition the control is reporting…
For the KitchenAid refrigerator record covered here, E3 is associated with evaporator thermistor problem. This wording should be read narrowly: it describes the system or condition the control is reporting, not a guar…
For the record covered by this page, do relates to door or drawer has remained open beyond the alarm delay. Confirm the exact definition against the full model number before ordering parts or authorizing an internal repair.
You can correct an obvious external condition and use the normal owner-approved restart or acknowledgement procedure. If the same code returns, clearing the display again does not repair the cause.
Only if the condition is clearly a normal status/maintenance indication and the appliance is operating normally. Stop using it for smoke, burning odor, arcing, repeated breaker trips, uncontrolled heating, gas odor, active leakage near electrical parts, or a significant loss of refrigeration.
No. The code identifies a condition or diagnostic path. Model-specific testing should confirm the failed component before parts are ordered.
References
Sources & references
KitchenAid built-in / Professional refrigeration — display & alarm codes (confirm model manual)
Ready to get your KitchenAid appliance working again?
Book a repair online or call us — clear estimates and approval before any repair work begins.
