For the KitchenAid refrigerator record covered here, PF is associated with power-failure alert. This wording should be read narrowly: it describes the system or condition the control is reporting, not a guaranteed failed part.
Reviewed by Liam Porter · Last reviewed August 11, 2026
Written by
Liam Porter Appliance Care EditorPublished September 2, 2026
Content status:
Verified
Error codePF
ApplianceRefrigerator
Affected model seriesKitchenAid built-in, Professional, 5 Series and 7 Series refrigeration (confirm your model manual)
Quick answer
For the KitchenAid refrigerator record covered here, PF is associated with power-failure alert. This wording should be read narrowly: it describes the system or condition the control is reporting, not a guaranteed fai…
Model compatibility: KitchenAid reuses codes across series and model years, so PF may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
Plain language
What this code means
Power failure (PF) — the unit lost power and is alerting you that temperatures may have risen during the outage. Check food safety, confirm the outlet and breaker, then reset alarms per your manual.
Signs
Symptoms you may notice
The display may appear after an outage, breaker trip, or interruption.
Clock/settings or alarm history may need acknowledgement depending on the model.
Food temperatures may have changed during a long outage.
Why it happens
Possible causes
A utility outage or unplugged/interrupted power source.
A tripped breaker or unstable supply.
A control reset/history condition after power was restored.
Before you call
Safe checks you can make
These are simple, non-hazardous checks only. If anything is unclear, stop and contact a technician.
Verify power cord and breaker
Check food temperatures before restocking
Disconnect power at the breaker for five minutes, then restore to clear stored alarms. Press alarm/controls per your manual if applicable.
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Please avoid
What not to attempt
Do not open internal panels or access high-voltage components
Do not bypass door locks, safety switches or interlocks
Get help
When to call a technician
If the safe checks do not resolve the condition, schedule an independent KitchenAid appliance diagnosis. Provide the full model number and a photo of the PF display so the technician can start with the correct model-specific code map.
Seeing this code on your KitchenAid appliance?
Book a specialist visit for a clear estimate and approval before any repair. Independent service — not an official KitchenAid service center.
For the KitchenAid refrigerator record covered here, CF is associated with condenser fan problem. This wording should be read narrowly: it describes the system or condition the control is reporting, not a guaranteed f…
For the KitchenAid refrigerator record covered here, DF is associated with defrost cycle did not complete normally. This wording should be read narrowly: it describes the system or condition the control is reporting,…
For the record covered by this page, PF relates to power-failure alert. Confirm the exact definition against the full model number before ordering parts or authorizing an internal repair.
You can correct an obvious external condition and use the normal owner-approved restart or acknowledgement procedure. If the same code returns, clearing the display again does not repair the cause.
Only if the condition is clearly a normal status/maintenance indication and the appliance is operating normally. Stop using it for smoke, burning odor, arcing, repeated breaker trips, uncontrolled heating, gas odor, active leakage near electrical parts, or a significant loss of refrigeration.
No. The code identifies a condition or diagnostic path. Model-specific testing should confirm the failed component before parts are ordered.
References
Sources & references
KitchenAid built-in / Professional refrigeration — display & alarm codes (confirm model manual)
Ready to get your KitchenAid appliance working again?
Book a repair online or call us — clear estimates and approval before any repair work begins.
